sk-9000

Specifications

The Flagship product of Shree Khodiyar Engineering co is SK – 9000 Model. It has jumbo production Capacity with minimum operating cost compare to other models. Some latest modifications introduce sensor technology make economical and most effective model.

Briquettes Diameterr 90mm
Briquettes Length 100mm/500mm
Prodution Capacity 1500Kg./hr*
Finished Product Shape: Cylindrical
Process Cost / MT (Approx) Rs. 500/- (In India)
 
Specifications of applicable Raw Material (any agro waste) & Other infrastructure
Raw Material Size 20mm ­ Maximum
Maisture Content of Raw Material Max 10%
If bigger size of Raw Material,

Hammer Mill required. Moisture contain
Max 10%
If moisture contain is higher than dryer is required.
Land Area In Feet (Machine Room) 20′ x 30′ x 14′ (Widht x Length x Height) Electricity / Power
Minimum Total Land require for whole plant [Machine area / Raw materials area]

5000 Mtr [Approx] Electricity / Power
Required Power Connection 90 hp (III phase)
Practical used Amp. Load 80- 90Amp (Approx)
Power Consumption 35-40 Unit/ Tone
Labor
Trained & Skilled operator One/shift
Unskilled labor Six/Shift.
Total weight of complite Unit 8500kg. (Approx)
Require one 20feet container
total size of complete unit 20′ x 30′ x 14′ (Widht x Length x Height)approx Production Data with Various Raw Materials (Approx
Sugarcane Baggasse /saybean husk 800/ 900Kg./ hr.
Groundnut Shell 1200-1500Kg. / hr.
Saw Dust/Wood Chips / Coconut Shell 1200 – 1600Kg./Hr.

Unit Consisting
Bio-mass Briquetting press with
75 HP Electric Motor with nylon beltt.
Complete lubrication system with Filter & 2 HP Electric Motor.
Feeding cyclone, Gearbox, 10HP Electric Motor.
Screw Conveyor – 20 feet long with gear box 3 HP Motor.
Cooling lines 30 feet with stand.
Complete operation panel board
Foundation channel for main motor.
Foundation bolts.
All above Elec. Motors with 1440 RPM operating AC Power supply shall be 415V, 3Phase, 50Hz.
THE FEATURES OF SK 9000 Maximum production capacity. Heavy structure with standard design. Acceptability up to 20 mm size of raw material. (No need of powdery form) Easy operating system High – density of finished product with 90mm diameter.

Lowest production cost per MT due to state of art technology. Lower electric consumption due to direct feeding without hammer mill.

Lower maintenance cost. Lower management cost due to High production capacity. No loss of production & air pollution due to direct feeding system.  

SK – 9000 SIDE EVEVATION WITH BACK CONVEYOR.


1. Briquetting press
2. Load Wheel
3. Feeding Kuppy
4. Reduction Gear
5. Screw Conveyor
6. Electric Motor
7. Bricks Wall of Shade
8. Ground Flooring
9. Space of Raw Material
10. Open Terrace
11. Water Tank
12. Main Electric Motor
13. Flat Belt
14. Die Holder